WTS: Colt 6450 Factory 9mm AR

[spikes40]

For Sale: Colt 6450 Factory 9mm

Gun is 98% and runs flawless...Factory 9mm with 4 position collapsing stock, bayonet lug, birdcage, LEO marked..comes with 1 32 round magazine and Hakko red dot scope. I have manual and original cleaning kit... will have to check for the box...1250.00

Only trades at this time would be parts for my SBR Supressed 9mm AR build ( red dot optics, or 9mm supressor NFA, 9mm SBR Upper)

FTF in Broward.. will travel half way to dade or WPB

I will post actual pics of gun tonight but this is what it looks like

https://policeguns.com/catalog/images/Clyde%20Armory%206450.JPG

[Cris]

Isn't it this center gun?

http://tacticaladv.com/picture.php?albumid=8&pictureid=112

[spikes40]

Cris you win the prize...yes but i have added a Hakko red dot as well

[anthony20031]

Is that an MP5 or the GSG look-a-like?

[Cris]

That's the GSG that he just got rid of.

[spikes40]

cris you are incorrect..thatw as my MP5 that i sold ( on the right) on the left was a coharie .40 cal clone

[anthony20031]

ok I remember talking about it with you in the shop....love that gun

[Cris]

I was looking at the left, would have swore it were the GSG.

[spikes40]

I know the run is only once a year but not sure if the other part is correct or not( picked this up from another board)

I understand Colt only does a 9mm build once per year in Q1.
Now, another guy, Gordon at HKSpecialist.net, claims they have been discontinued for good and is asking several hundred more for the NIB's he has. He is the only guy I have heard that from and don;t know if he is confusing the seasonal build pattern with a permanent situation or not.

[spikes40]

I may just keep the 6450 and register the lower as an SBR and just build the supressed upper

[JaxChris]

Now that sounds like a plan. =)

[spikes40]

jax if i dont get a stripped upper this weekend... i may have you grab one for me when you go to spikes next if you dont mind

[JaxChris]

The upper receivers from Spike's come with the ejection port and forward assist. =)

At the next show or visit to Spike's I'll grab an extra if I have the additional cash at the time.

[spikes40]

cool... i may grab one this weekend if i make it to the show...not as much of a need now since i am keeping the 6450 and registering that as the sbr ( gonna try to get the paperwork out tomorrow)..if you did grab one for me.. i could always get you cash before hand..no problem..thanks!

PS..im guessing the 9mm upper does not have a forward assist

[JaxChris]

Correct, 9mm uppers have the gas blocker and no forward assist.

And if you sent the money you'd definitely get one. =)~

[spikes40]

sweet... thx ax..ill let you know

[spikes40]

Form 1 SBR paperwork is in the mail....let the wait begin

[ss1]

A couple years ago, I went on a quest looking for a upper with no forward assist or deflector "bump", but with the lugs to handle a dust cover (basically a 9mm upper), as you can find the 9mm shell deflectors easily and you can always cut down a standard dustcover. As it turns out, they are really hard to find completely stripped. I wound up buying a RRA dedicated 9mm upper from adco (www.adcofirearms.com).

[JaxChris]

C3PO, do they have the 9mm deflector that can be put over the standard brass bump for use on 5.56 uppers? I'd like the larger deflector for one of my builds (specifically the future SBR, which I'll train with having closer to my face).

Thanks.

[ss1]

The 9mm deflector is held in place by the dust cover rod. Since the case length is so much shorter on the 9mm, they deflector covers the rear portion of the ejection port. I'm sure it would interfere with the standard operations of a 5.56/.223.