View Full Version : My Spike's SBR - Photo
JaxChris
04-21-2010, 05:39 PM
Here's what it will look like. I'll actually be swapping the stock to a UBR and depending on the final dimensions I'll swap the new Spike's BAR (Big Ass Rail) to their upcoming Slim Rail. And look, it's even a high resolution pic.
http://i135.photobucket.com/albums/q160/badazzar15/cd-sbr.jpg
anthony20031
04-21-2010, 05:53 PM
Like it a lot
JaxChris
04-21-2010, 06:08 PM
Thanks... can't wait for my stamp. Those Lothar Walther 7.5" barrels are heavy. It definitely needs the UBR to balance the weight. It will likely weigh more than my lightweight 14.5 build, but it'll be as solid as a tank when I'm done tinkering with it.
The front is not a suppressor. I found out the can I wanted wouldn't fit. That is a STAB (Spike's Tactical Adjustable Brake). That photo is also not mine, it is another in-house build with very similar specs to what I've got coming.
anthony20031
04-21-2010, 06:41 PM
Thinking about building an SPR but I have so much on my plate. I would also need to setup the trust but don't feel like paying a lawyer $200 to do it. Love it though
That's a nice pic, I want to see the real thing though.
Satan_3pc
04-21-2010, 11:22 PM
I want one!
Secpro
04-22-2010, 07:28 AM
That looks good Jax. Sweet rifle.
That BAR looks like it took a few elements from the YHM rails. What suppressor did you want to go with?
JaxChris
04-23-2010, 12:51 AM
That BAR looks like it took a few elements from the YHM rails. What suppressor did you want to go with?
The can was going to be the Ops Inc M4-s from ADCO. But then it turns out the O.D. of that can is 2" and not 1.75" like I was originally told. My goal is to keep everything as short and balanced as possible. The only other consideration to the design change may be to get a Gemtech M4-02 if that will fit under the Slim rail and match it to a 7.3" barrel.
I've also considered saying fuck it to my 12"/25" requirement and getting a 7.3" barrel, 10" or 12" rail, and a YHM 7.62 suppressor countersunk in a longer MP5SD style configuration. It would exceed my max preferred length requirement by 3.3" and increase my build cost by 400-600$ (all barrels available under 10.5" are expensive now and the YHM rail is more than the M4-s or STAB).
The original config was going to be a 10.5" CHF barrel with the M4-S countersunk 1" under a 9" rail (the M4-S slide back on the barrel like the rest of the OPS Inc lineup). But now that I can't do that, if I have to go longer, I will at least go thinner to compensate.
I may even throw a 37mm launcher on there instead of a foregrip. But haven't decided that yet. *shrug*
where could you fire the launcher ?
Secpro
04-23-2010, 12:07 PM
The boonies baby
where could you fire the launcher ?
Out at sea at all those dive flags floating around.