ss1
01-21-2009, 04:04 PM
I came across a company that makes a very similar concept called kholster (http://www.kholster.com/). The price point on these is much lower than the Crossbreed, but comfort and quality is essential for a holster you are going to want to carry and possibly rely your life on. So before the SHOT Show, I ordered one for a 1911 to try and compare to the Crossbreed. It only comes in cowhide, so my biggest concern was stiffness, as it seems to have a little more leather coverage. The holster arrived yesterday and my initial thoughts are:
The leather is about the same thickness as the horsehide crossbreed which could mean less durability
The leather comes very supple and would probably feel comfortable without using any leather conditioners.
The plastic holster portion is rivited to the rough side of the leather with the smooth side facing your body
There are more mounting positions for the belt hooks since there is a lot more leather, but no-J hooks as an option - It does appear that the hooks are exactly the same length and width, so using Crossbreed's J-hooks is certainly possible.
At least on the 1911, the mold they used was for a series 70 which has the standard ejection port. This allows both 70 and 80 series 1911's to fit perfectly, unlike the Crossbreed which uses the series 80 lowered ejection port which binds on 70's series 1911's.
Anyhoo, I'll see if I can muster up some holster time for the Colt Commander, but it does seem like a good value.
The leather is about the same thickness as the horsehide crossbreed which could mean less durability
The leather comes very supple and would probably feel comfortable without using any leather conditioners.
The plastic holster portion is rivited to the rough side of the leather with the smooth side facing your body
There are more mounting positions for the belt hooks since there is a lot more leather, but no-J hooks as an option - It does appear that the hooks are exactly the same length and width, so using Crossbreed's J-hooks is certainly possible.
At least on the 1911, the mold they used was for a series 70 which has the standard ejection port. This allows both 70 and 80 series 1911's to fit perfectly, unlike the Crossbreed which uses the series 80 lowered ejection port which binds on 70's series 1911's.
Anyhoo, I'll see if I can muster up some holster time for the Colt Commander, but it does seem like a good value.